Popular ways to inflate a ball without a needle, and how to deflate it correctly

Instructions for soccer balls

In order for a soccer ball to serve you for as long as possible, it, like many other types of sports equipment, requires proper care and compliance with operating conditions.
These factors, as well as the intensity of use of the ball, largely determine its service life. Operating conditions mean, first of all, the type and properties of the playground surface and weather conditions.

There are several main types of playing surfaces:

– very hard (SUPER HARD), these are cinder areas, parquet in the hall, as an exception, asphalt area, etc.;

– hard, hard (HARD, TURF) made of various synthetic materials (can be used both indoors and outdoors);

– soft: soft ground, lawn.

There are several types of weather conditions, the main ones being: rain, snow, mud, high humidity and air temperature.

It should be understood that the materials used in the production of the ball, the design options of the ball and the resulting technical characteristics, such as rebound height, moisture resistance, wear resistance, are selected for specific operating conditions. Therefore, carefully study the pictograms on the ball; they will tell you which weather conditions and on which courts you can play with this ball model.

Dear customer, we consider it our duty to emphasize that football is still a game on a grass lawn at temperatures above 0°C! Soccer balls, in principle, are not intended for playing in extreme conditions, such as, for example, frost - 20 ° C or asphalt. This does not mean that it is impossible to play with them in such conditions, of course you can, but the service life of the ball is reduced by 3-5 times, and difficulties arise when returning the goods under warranty, since the defect is not a manufacturing defect, but is a consequence of violation of operating conditions .

How to properly inflate a soccer ball?

To inflate the ball, in addition to the pump, you will need a ball needle, a pressure gauge (pressure measuring device) and nipple lubricant (glycerin oil, for example). There are pumps with a built-in pressure gauge, but if you don’t have one, and you don’t want to purchase a separate pressure gauge, then you can check the correct inflation of the ball “by eye”; we’ll tell you how later.

1. Before you inflate your soccer ball, find out what pressure is appropriate for it. Manufacturers usually indicate this information on the tire next to the nipple; the value can be expressed in atmospheres or bar.
   The level of pressure for playing on different surfaces is different, since in some places the ball must be more rigid and bouncy, and in others less so.
   • To play on grass, the pressure in the ball should be between 0.6 and 0.8 bar;

   For playing in the gym - 0.6 bar

2. To play on a hard surface (asphalt, for example), the ball needs to be inflated to 0.8 bar
3. Next, you need to lubricate the needle and nipple with glycerin oil so that the valve is not damaged and the needle fits into it more easily.
4. Attach a needle to the pump and start pumping the ball.
   The main thing is to take your time so as not to over-inflate the ball and not put too much pressure on the seams in the chamber. If you don't have a pressure gauge to use as a guide, raise your ball to shoulder level and release. If the ball bounces up to the height of your waist, you can assume that it is well inflated.

Method No. 1: compressor

How to inflate a ball without a needle? Contact any of the car services in your locality - employees will help you for free or for a nominal sum. Don’t ignore tire shops: they will definitely have powerful compressors for inflating car tires. One thing: there is a risk of pumping the product with air, which will lead to its damage or even explosion.

A compressor is equipment from which air comes out under pressure. Therefore, this is an excellent answer to the question: “How to inflate a ball without a needle and pump?” If possible, it is recommended to carry out the procedure together: one person will turn the compressor on and off, and the second will hold the ball and press the cord, controlling the process of air flow. The hose with the nozzle is pressed tightly against the valve, after which the device turns on at full power. It must be decontaminated immediately as soon as the surface of the ball becomes hard. That's all!

How to deflate a soccer ball?

An equally important question that interests every ball owner. The ball must be deflated through the same hole as inflated - through the nipple. If you have a football needle, you need to lubricate it with glycerin or petroleum jelly and insert it into the nipple. The air will begin to leave little by little, deflating the ball.

If there is no special needle, a pen refill (without a metal tip or ink) or a plastic hollow tube from a cotton swab will do. Any of these improvised means will also need to be lubricated and inserted into the nipple hole strictly perpendicularly to avoid damage to the camera. It is important not to pull the needle (rod or tube) while lowering the ball, so as not to loosen the nipple, maintaining its integrity. In this case, the ball will not deflate during use in the future.

Method number 2: electrical tape, syringe needle, bicycle pump

The tools here are some of the most accessible: a bicycle pump is available in almost every home, you can easily buy electrical tape at a department store or hypermarket, and a syringe at a pharmacy. How to inflate a ball without a needle using this method? As easy as pie:

1. Take a syringe needle - the first thing you need to do is sharpen its sharp tip on asphalt, brick, stone, curb or a special knife. If it is too sharp, it will easily pierce the nipple, which will make the ball unusable. The best needle would be for blood transfusion systems - it is thick, durable, and does not bend.
2. The second step is to make a kind of adapter from electrical tape - 10-12 layers of it are enough. They need to be wound tightly so that the air does not escape back when pumping.
3. How to inflate a ball without a needle? Attach the invention to the bicycle pump and begin the procedure.

How to clean a soccer ball?

Caring for a soccer ball primarily involves keeping it clean and dry. After each training or game, it is recommended to wipe the surface of the ball with a slightly damp soft sponge or cloth. If moisture remains on the camera after wiping, you need to wipe the ball with a dry paper towel (it is the softest and absorbs well).

If there are strong stubborn stains on the surface of the ball, they can be removed using specialized products for cleaning artificial leather or liquid soap. It is necessary to rinse off the cleaning agent under low pressure of water so that water does not get inside the ball. You cannot use caustic active agents, as they can significantly damage the integrity of the camera.

The soccer ball should dry naturally at a temperature of 20-25 degrees. It is highly undesirable to place the ball on heating devices or dry it with a hairdryer.

Method number 3: syringe

How to inflate a volleyball, basketball, soccer ball without a needle? Use a large medical syringe! This is a last resort, because the method is quite grueling - you will spend about 2 hours on the procedure.

As with the second method, you will need to blunt the needle, otherwise you will damage the nipple and the ball will continue to deflate. Which syringe to choose? The bigger, the better:

• It’s possible to pump up a ball with a twenty-cubic ball in 30-40 minutes.
• A ten-cc syringe will make you pore over the ball for an hour to two.

Before starting the procedure, we recommend that you treat the nipple with silicone grease - this will protect it from damage from an imperfect syringe needle. The procedure is simple: insert the needle into the hole, press the syringe lever, and release the air. Then remove the tool, return the lever to its original position and repeat the procedure.

Soccer ball storage

Questions about storage usually arise among owners of amateur soccer balls, since their homes do not have special rooms with the required level of humidity and temperature, equipped with stands for sports equipment.

If you follow a small list of storage conditions, your ball will remain in its best condition for a long time.

• The ball must be secured. The floor is simply not suitable for storage, since the projectile will inevitably roll into different corners, interfere with the movement of household members, get dirty or be exposed to pets. It is better to put the ball in a basket or small box;
• It is better to store the ball in a dark, dry place, away from heating appliances and showers.

other methods

Let us give you some more tips:

• If you do not find a medical syringe, then its needle can be replaced with an empty refill from a regular ballpoint pen.
• If you only managed to pump up the ball a little, then you can restore its hardness and elasticity like this: just keep it in hot water for a while. This will cause the air inside the product to heat up, causing it to expand, which will complement the jumping effect.
• Silicone grease for nipple treatment can be replaced with machine oil.
• The needle can be attached to the cap of a plastic bottle for a homemade pump with a glue gun.
• Instead of a compressor, bicycle pump, bag or bottle, you can use a regular rubber medical bulb.
• A can of compressed air, a car's spare tire, or a trash bag can also act as a pump.

Which volleyball should a beginner buy?

Choose a waterproof, dense but soft microfiber ball that will cover the synthetic leather. For beach volleyball, sewn balls are most suitable. Professionals say that it is better to choose volleyball balls made of genuine leather. Firstly, they are softer and more pleasant to play with.

Interesting materials:

Do I need to consecrate the cross after purchase? Do I need to replant my dendrobium orchid after purchasing it? Do I need to charge it after purchasing a new battery? Do I need to undergo a new inspection when buying a car? Why is it better not to buy a house in St. Why can’t you buy things for your child in advance? Why does it say the date of purchase is not confirmed? How many days are given to register a vehicle after purchase? How long should a refrigerator sit after purchase? What are the dangers of buying a house in St.

Choosing the right ball

There are the following types of bouncing balls:

• classic bouncing ball (without various additional devices);
• a bouncing ball for children, it has special horns;
• bouncing ball with handles.

Each of the above types can have a smooth or textured coating.

Small children will be more pleased with balls with the image of some animal or, for example, a bouncy ball with horns. The advantages of the latter are that the horns amuse the child and are comfortable to hold on to while jumping.

For older children and adults, it is better to purchase a gymnastic fitball or jumping ball with a handle that is comfortable to hold on to while performing exercises. To prevent the handles from slipping out of your hands, their surface is made of non-slip materials.

The size of the jumper is chosen based on the age of the child:

• at 1-3 years old, a bouncing ball with horns 45 cm;
• at 4-6 years old - 50 cm;
• at 7-9 years old - 55 cm;
• at 10-12 years old - 60 cm;
• for children over 12 years old or adults - 65 cm.

Be sure to follow these recommendations, otherwise the benefits of the exercise will decrease.

One of the recognized leaders in the production of bouncing balls is the Torres company. Torres balls are high quality and made from durable PVC. Another advantage of this company’s products is safety for users: bouncy balls for children do not explode if punctured, but slowly deflate without scaring the child. The most common model is the Torres 55 cm bouncy ball with handles.

An equally interesting type of ball is the Mondo bouncing ball. It is suitable for both games and exercise. The ball is also made of high-quality PVC and equipped with a long plastic handle. To play with it, you need to stand with your feet on a special stand and jump while holding the handle.

What to choose: a strong blow or an accurate one?

4). What to choose: a strong blow or an accurate one?

Strong kicks are performed with the toe or different parts of the instep, since in these cases the kicking leg can move at a higher speed, and the area of ​​​​contact of the leg with the ball is smaller than when striking with the inside of the foot.

Strikes delivered with a wide plane are more accurate. The highest accuracy is achieved when striking with the inside of the foot, somewhat less - when striking with the instep (its different parts), and the lowest - when striking with the toe.

We do not yet understand with the child which part of the foot produces this or that blow. Our task is to follow some principles, which will be discussed below.

What can I do to prevent the ball from deflating?

Most balls lose air over time. Some deflate more than others, it doesn't necessarily depend on the brand, there are other factors as well.

• Insufficient use
  . This is the most common reason for the ball losing air. Regardless of what type of ball you use: Sasaki, Chacott or any other, you need to use the item regularly for it to work properly.
• Incorrect inflation
  . If you follow the tips for inflating balls described above, then in most cases you will not encounter this problem.

If the problem persists, we advise you to consult your supplier. However, if your ball has been misused, not properly cared for (we recommend purchasing a ball cover), or has been used for a long time, we recommend simply purchasing a new ball.

Useful tips for inflating the ball

How to inflate a fitness, football or basketball ball with a pump with or without a needle should be clear to you, but we also recommend following the following tips:

• Regardless of which pump you decide to pump the ball with, don't overdo it. Exceeding the recommended pressure will affect the geometric shape of the ball and cause excessive tension at the seams.
• By inserting a dry needle into the nipple without silicone lubricant, you can grind the overdried rubber, as a result of which the valve will become unusable over time.
• Do not store the ball in the sun or in the cold. If you store it in the trunk of a car, the air inside will be compressed and the ball will shrink slightly. When you come to the gym and pump up the ball, it will soon get warm and may burst from a strong blow. Also, sun rays and frost negatively affect the rubber from which the nipple is made.

We are sure that our tips on how to inflate a large gymnastics ball or a regular football, basketball or volleyball will come in handy more than once in the future, so try to remember and use this information.

Rating of quality ball pumps for 2022

The rating includes the best options, according to buyers. The type, review, and consumer reviews were taken as a basis.

Inexpensive (budget) models

In the price range up to 600 rubles.

TORRES SS1020

Plastic hand pump complete with needle. Length: 20 cm. Inflates football and basketball balls quickly and efficiently. You can purchase additional attachments for pumping other types of equipment. Average price: 144 rub.

TORRES SS1020

Advantages:

• easy;
• compact;
• verified manufacturer.

Flaws:

• not found.

Z-Sports with needle

Made from polyvinyl chloride and comes with an inflation needle. Length with handle 20.5 cm, without handle (folded) 15 cm. Country of origin: China. Weight: 65 gr. Suitable for basketball and other nipple models. Price: 212 rub.

Z-Sports with needle

Advantages:

• compact;
• pumps up quickly and easily;
• complete with needle.

Flaws:

• not found.

Pump (with fitball attachment)

The frog pump is suitable for regular models and has a fitball attachment. Dimensions: 14x6x5.6 cm. Made of high-quality plastic. Quickly and efficiently pumps up any volume, and you can pump with your foot and hand. This option is not always convenient to take with you; it takes up more space than conventional hand pumps. Price: 180 rub.

Pump (with fitball attachment)

Advantages:

• with an attachment for a fitness ball;
• you can swing your leg;
• quality materials.

Flaws:

• inconvenient to take with you.

SILAPRO for gymnastic ball

Made of high-quality plastic, has dimensions: 28x5 cm. Resistant to external influences, it can easily inflate fitballs and gymnastics equipment. The needle for inflating nipple balls is purchased separately. Price: 355 rub.

SILAPRO for gymnastic ball

Advantages:

• optimal camera size;
• quality material;
• convenient to use.

Flaws:

• Only the pump is included.

Proball with hose and needle, P04608Red

The package includes a detachable hose and a standard size needle. Length: 30 cm. Inflates nipple models of any diameter as easily as possible. Collapsible type. This option can be ordered online in the online store. Price: 350 rub.

Proball with hose and needle, P04608Red

Advantages:

• optimally priced;
• universal;
• Includes needle and removable hose.

Flaws:

• not found.

ATEMI JY-18

Hand pump made of durable plastic, with a standard size needle, for inflating sports balls. Color: blue. Packed in a plastic bag. Weighs 200 g, length when folded is 20 cm. The elesator is included. Price: 160 rub.

ATEMI JY-18

Advantages:

• price;
• works quickly and efficiently;
• small-sized.

Flaws:

• not found.

START UP CJ-S34F

A small model, only 15 cm long, made of plastic, equipped with a needle. Weight: 80 gr. Country of origin: Taiwan. The double-action design (pumps air when the piston operates in both directions, not only during compression) allows you to inflate equipment as quickly and easily as possible, this is especially important before the game. Price: 302 rub.

START UP CJ-S34F

Advantages:

• double action;
• compact;
• easy.

Flaws:

• The needle included in the kit has a wide base, making it difficult to find a replacement.

KIPSTA with pressure gauge

Designed for quick and precise (to the required pressure) inflation, even during training. The pressure gauge controls the required pressure. The built-in hose extension provides additional protection for the needle. The manufacturer provides a 2-year warranty. Price: 599 rub.

KIPSTA with pressure gauge pump

Advantages:

• double action;
• additional protection;
• pumping accuracy.

Flaws:

• without cover.

In-Sports JLA013, 12″ (30.5cm). Red

Powerful manual option. The kit includes a needle, a removable hose and a fitball attachment. It is convenient to store the nozzles in a special compartment in the pump body. In order to get the attachments, you just need to unscrew the handle. Weight: 200 gr. Manufacture: China. Price: 395 rub.

In-Sports JLA013, 12″ (30.5cm). Red

Advantages:

• durable;
• the attachments are convenient to store;
• universal.

Flaws:

• not found.

INDIGO, 8 inches 19069 20 cm

The kit includes a removable hose and needle. Made of plastic, 20 cm long. Allows you to quickly pump up any nipple type of equipment. Small size ensures ease of use. There are no additional attachments included. Price: 170 rub.

INDIGO, 8 inches 19069 20 cm

Advantages:

• small-sized;
• easy to use;
• acceptable cost.

Flaws:

• no additional attachments.

Premium models

With a price range from 600 rubles.

Mikasa PA-22, AP-H, blue

The Mikasa brand, of Japanese origin, guarantees the high quality and durability of its products. Manual type, the kit includes an elesator and a needle with a diameter of 3 mm. Length: 27 cm. Packed in a plastic bag. It is convenient to take with you and does not take up much space. Cost: 636 rub.

Mikasa PA-22, AP-H, blue

Advantages:

• reliable manufacturer;
• compact;
• convenient and easy to use;
• works quickly and efficiently.

Flaws:

• only 1 nozzle included.

Nike Essential Ball Pump, NKJ02-027, black

Professional grade pump. Durable, high-quality material of the body and attachments ensures the longevity of the device. Its compact size allows you to take it with you and fits into any bag. Brand country: USA. Sold in plastic packaging. Cost: 1300 rub.

Nike Essential Ball Pump, NKJ02-027, black

Advantages:

• professional;
• high quality materials;
• verified manufacturer.

Flaws:

• not found.

Chacott

Made from synthetic rubber. Manufacturer from Japan: Chacott. Size: 16cm. Suitable for rhythmic gymnastics ball, can inflate massage balls. This model allows you to replace the needle if necessary. Cost: 2000 rub.

Chacott pump

Advantages:

• quality work;
• trusted manufacturer;
• the needle can be changed if necessary.

Flaws:

• it is difficult to find a replacement needle from such a manufacturer.

MoscowCycling MC-PUMP-02, blue

A universal option, the handle can be folded. Also suitable for bicycles and a number of children's toys. A folding foot stand will help securely fix the pump on any surface. When folded, the size is 31 cm. Weight: 190 g. Cost: 690 rub.

MoscowCycling MC-PUMP-02, blue

Advantages:

• universal;
• works quickly and efficiently;
• convenient stand.

Flaws:

• no double action.

START UP CJ-R123H

Double action pump, set includes needle and retractable hose. There is a special lubricant on the tip of the needle for treating the nipple before work. Material: plastic. Length: 30.5 cm. High ergonomic characteristics. Cost: 600 rub.

START UP CJ-R123H

Advantages:

• quality materials;
• ease of use;
• There is a special lubricant for the nipple.

Flaws:

• no additional attachments.

Jogel JA-106

Allows you to quickly and easily inflate any sports ball, thanks to the double-action principle. High-quality, durable material provides protection against falls and durability. The plastic needle is included in the kit and is located under a cap, this preserves its integrity from external influences. Size: 15 cm. Cost: 3362 rub.

Jogel JA-106

Advantages:

• reliable;
• lasting;
• compact.

Flaws:

• no additional attachments.

"Miter", with pressure gauge, color: dark gray

Swedish model. The pressure gauge ensures optimal pressure inflation. Suitable for volleyball and other sports equipment. The set includes a flexible, removable hose and a needle. Length: 23 cm. Brand: Miter. Weight: 390 gr. Cost: 1110 rub.

"Miter", with pressure gauge, color: dark gray

Advantages:

• built-in pressure gauge;
• Ease of use;
• verified manufacturer.

Flaws:

• quite heavy.

Universal pump, 4 nozzles: for bicycles, inflatables and cars

Durable, lightweight, versatile. It will help you cope with any trouble, a deflated tire, an inflatable mattress, a children's toy and any nipple ball. Suitable for a soccer ball, it can pump it up even during training. The set includes 4 types of attachments. Cost: 610 rub.

Universal pump, 4 nozzles: for bicycles, inflatables and cars

Advantages:

• optimal price-quality ratio;
• advanced functionality;
• There is an attachment for bicycle, car and inflatable products.

Flaws:

• not found.